Differences

This shows you the differences between two versions of the page.

--- featherchorder [2016/02/21 21:09]
priestdo
+++ featherchorder [2016/02/21 21:12]
priestdo
@@ Line 21: / Line 21: @@
 {{https://github.com/clc/chorder|https://github.com/clc/chorder}}
 </box|Thanks to Charles Chen for his work on this version! >
@@ Line 31: / Line 32: @@
   - an adafruit feather 32u4 bluefruit
-  - 7 keyswitches, I suggest Cherry Red MX switches((I still put in lighter springs, but the reds are the best switch with which to start.))
+  - 7 keyswitches; I suggest Cherry Red MX switches((I still put in lighter springs, but the reds are the best switch with which to start.))
   - a small SPDT switch
-  - a LiPo battery with 2-pin JST-PH connector, I like 350mA, 500mA is probably overkill.
+  - a LiPo battery with 2-pin JST-PH connector; I like 350mA, 500mA is probably overkill.
   - something to hold your keys, see other sections of this site for case  ideas.  It will work with the [[:3d_printer_files]].
 ===== The Chords =====
-Once you grab a copy of the code you can find all the chords in the ChordMappings.h file.  Change them as you see fit.  They are the same as the chords I use on the spiffchorder with one set of changes - I have added a bunch of android specific chords.  Media events, Volume control and the like.  I will add a chart here in the not too distant future.  In the mean time, the ChordMappings.h file has them.
+Once you grab a copy of the code you can find all the chords in the ChordMappings.h file.  Change them as you see fit.  They are the same as the chords I use on the spiffchorder plus one set of changes - I have added a bunch of android specific chords.  Media events, Volume control and the like.  I will add a chart here in the not too distant future.  In the mean time, the ChordMappings.h file has them.